CARLUEX Accessory Installation Guide

In this guide, we'll show you how to use CARLUEX accessories to make your installation process smoother.

 

Accessory List:

Mount

Magnetic Sticker

3M Adhesive

Velcro

 

Installation Steps

Step 1: Prepare the Magnetic Sticker and 3M Adhesive

First, stick the 3M adhesive to the magnetic sticker. Be careful not to stick the 3M adhesive directly to the box first. It's recommended to stick the 3M adhesive to the side of the magnetic sticker with the blue film (the side without 3M adhesive), because the other side needs to have the paper removed to stick firmly (this is the side with 3M adhesive).

 

Step 2: Attach the Magnetic Sticker

Attach the prepared magnetic sticker with the 3M adhesive to the CARLUEX box, making sure it sticks firmly.

 

Step 3: Install the Mount

Place the mount in a suitable position inside your car, then place the CARLUEX box on the mount.

 

Step 4: Use the Velcro

Finally, stick the Velcro in a suitable position. This not only makes your car look nicer but also prevents poor contact between the USB port and the cable, avoiding disconnection between the box and the car system. This step is very important, so don't skip it.

 

You can also check out the video below:

That's it! We hope CARLUEX brings you a better experience! This simplified guide should make it easier for your customers to install and use CARLUEX accessories. If you have any further needs or modifications, please let us know!